In the posts above I looked at how the gamma curves effect the contrast range within the picture and highlight handling. I also noted that while I like the latitude (range) offered by using the Hypergammas that they produce a very flat looking picture. One of the adjustments that you can make to the Gamma curves is the Black Gamma. Adjusting the Black Gamma stretches or compresses the bottom part of the gamma curve, this makes the darker parts of the picture darker (negative setting) or brighter (positive setting). When setting the Black Gamma you will find 4 different ranges to choose from. Low, Low-Mid, Hi-Mid and High. These settings determine the range over which the black gamma works. Low only effects the darkest 10% of the image, L-Mid the bottom 20%(approx), H-Mid the lowest 30%(approx) and Hi the lower 35% (approx). So if you just want to make your deep shadows and blacks darker you would use Low. If you want to make the overall image more contrasty you would use H-Mid or Hi. I like to give my images a bit more impact so I often use H-Mid at -30. If the pictures are to be graded I would not use any negative black gamma.