So, here’s what I am working on. This is a “work in progress” but I’m liking where it’s going. My aim is to create a truly useable kit for the F3 that will turn it into an ENG type camera. Now I’m not suggesting that the F3 is a good camera for news or that type of fast moving thing. But for documentaries it has a big place and the easier I can make it to use, the better. The rig is made up form all kinds of bits and pieces.
1: This is an old Canon J16x8x2 SD broadcast lens, which becomes a 20 to 320mm f4 zoom lens. It works OK, fine when wide but a little soft in the corners at the long end.
2: New metal body HDSDi Cineroid EVF attached with a custom bracket (5)
3: Genus GMB-P ENG camcorder adapter with 15mm bar support. This has the quick release wedge needed to work with the VCT-14 tripod plate.
4: My B4 to F3 adapter. Watch this space, in production very soon.
5: Custom made (by me) PMW-F3 ‘H” plate. This attaches to the two 1/4″ threads on the top of the camera body and gives you lots of 1/4″ threads along the entire length of both sides of the top of the F3. To this attaches a custom fully adjustable viewfinder mounting system.
6: Custom made shoulder mount. On production units this would be a little shorter, it’s a bit tall on the prototype. It features an adjustable soft shoulder pad and mounts for the cheese plate and VCT-14 adapter.
7: Genus cheese plate.
8: IDX V-Lock adapter plate. But you could also use an Anton Bauer plate.
9: DSM V-Lock battery (98Wh). Will run the rig for over 4 hours.
10: VCT-14 quick release plate.
The balance point for the rig is just slightly forward of the centre of the shoulder pad, so it’s really nice to handhold. A slightly bigger battery or a Convergent Design Gemini on the back would give near perfect balance.
So, what do you think, would you by this lot (excluding lens and EVF) as a kit? I’m looking to do a small run of kits, no idea of the price yet. More pictures below, click on the thumbnail for a high-res image.
