Well no surprises here to be honest but Mike Tapa of MTF has already finalised the design of an adapter that will allow users of Sony’s still to be released PMW-F3 to use low cost (compared to PL) Nikon DSLR lenses. This open up a huge range of lens options and I’m quite sure that with good high end lenses the results will be very good. It’s certainly the way I will be going.
http://www.lensadaptor.com/
As promised here is a picture of the base of an F3. It is the same size tripod mount as on the EX1R, plus an additional off-set 1/4 hole towards the rear of the base (which is flat).
Below is a picture of the lens mount with the PL adapter removed. I was surprised to find that this appears to be the same mount as the EX3 except with the electrical contacts in a different position and a small pin in that locates with a cutout in the top lens mount flange. It looks to me as though an Adaptimax or MTF EX3 to Nikon adapter would go directly on the F3 with just a small slot cut in the top flange of the adapter to clear the extra mounting pin.
