OK folks. I wanted to see just how well a 2/3″ broadcast lens would work on an F3, but don’t have $5.5k to fork out on one of the Abel adapters. So with a bit of head scratching, a few, lowish cost lens purchases and a few hours in the workshop I cobbled together my own adapter. At first I tried a 2x magnifier but this didn’t quite give me full sensor coverage and was soft out in the corners. With a little more work I took the magnification up to 2.5x and I have clean corners. I’m really pleased with the performance, although one lens element needs changing for a higher quality element to combat some softness when the iris is fully open.

My old Canon J16x8 f1.8 becomes a 24 to 320mm f4(ish) par-focal lens which is actually quite handy. Next step is to make up a power cable for the lens so I can use the zoom servo.

I’m considering trying to find a manufacturer that can make these up for me properly, the converter should cost a lot less than $5.5k

OK folks. I wanted to see just how well a 2/3″ broadcast lens would work on an F3, but don’t have $5.5k to fork out on one of the Abel adapters. So with a bit of head scratching, a few, lowish cost lens purchases and a few hours in the workshop I cobbled together my own adapter. At first I tried a 2x magnifier but this didn’t quite give me full sensor coverage and was soft out in the corners. With a little more work I took the magnification up to 2.5x and I have clean corners. I’m really pleased with the performance, although one lens element needs changing for a higher quality element to combat some softness when the iris is fully open.

My old Canon J16x8 f1.8 becomes a 24 to 320mm f4(ish) par-focal lens which is actually quite handy. Next step is to make up a power cable for the lens so I can use the zoom servo.

I’m considering trying to find a manufacturer that can make these up for me properly, the converter should cost a lot less than $5.5k