Tag Archives: PMW-350

Uncategorized

PMW-350 Scene Files for Download

3 Comments

PMW-350 Scene Files for Download

Alister-350-Scene-flies1

Click on the link above to download a set of my latest scene files. Un-zip and copy to the root of an SxS card, the in the file menu load the files.

These are mainly matrix tweeks. neut2 is one I like that gives rich primary colours while still reasonably true to life. Cine1 is a sudo filmic look Film1 is meant to emulate well saturated film stock DSC-1 is based on Chroma-Du-Monde chart for accurate daylight color Neut is my first matrix tweak for a less green look and warmer skin tones.

Uncategorized

Vapour: The Sky in motion.

Leave a comment

The last couple of days provided some really spectacular skies with amazing vapor trails and fluffy clouds. So I grabbed a selection of cameras and shot a bunch of timelapse which you can see cobbled together in this clip. I used a Sony PMW-350 and a Canon 350D and 550D. Amazing how well they match after a quick grade. I also included an previously un-used Aurora shot from Iceland at the end. The name of the clip comes from the fact that clouds are made of water vapor and ice crystals.

You can also watch it in HD on Exposure Room.

Uncategorized

PMW-350 Aperture Correction what is it doing?

3 Comments
PMW-350 Aperture Correction

After completing the multi camera shootout at Visual Impact, one thing was bothering me about the pictures from the PMW-350 and that was the way the specular highlights in the tin foil were artificially enhanced. During the test the camera was set to factory defaults, which IMHO are too sharp, but the foil in particular looked nasty. Since then I have been further refining my paint settings for the 350 and looking at detail and aperture. Today I was replicating the tin foil test and looking at the aperture settings (not the knee aperture) and I noticed that turning aperture on and off had a very pronounced effect on highlights but a much smaller effect elsewhere in the image. Normally I would expect the aperture setting to act as a high frequency boost making subtle textures more or less enhanced, which it does, but the amount of enhancement appears to vary with the brightness of the image with specular highlights getting a really big hit of correction. If you look at the images to the left at the top you have aperture correction on at +99. There are big ugly black lines around the highlights on the foil and the texture of the carpet has been enhanced. To some degree this is the expected behaviour although I am surprised by how thick the edges around the highlights are, this looks more like detail correction (it could be “ringing”). The middle images are aperture off, not zero but actually off and you can see that the edges on the foil have gone and the carpet is no longer enhanced. The bottom picture though with aperture on at -99 though is very interesting as the carpet appears slightly softer than OFF, which is not unexpected while the foils is sharper than OFF and this is not expected. I don’t like this behaviour I’m afraid to say as a typical way to get a filmic look from a video camera is to turn the detail correction off to give a natural picture and then use Aperture correction to boost high frequencies to retain a sharp image. On the PMW-350 you can’t do this as this as a high Aperture setting will give you those nasty edges on highlights. So what can you do? Well the 350?s native, un-enhanced resolution is very high anyway so it doesn’t need a lot of correction or boosting. The default Detail and Aperture settings will give some really nasty highlight edges so you need to back things off. If your going for a filmic look I would turn OFF aperture correction altogether, for video work with pictures that have some subtle enhancement I would use Aperture at around -20, certainly never higher than -15 unless you like black lines around specular highlights.

My current prefered detail, aimed at giving a very slight, not obvious enhancement are are as follows:

Detail Level -12, H-V Ratio +15, Crispening 0, Frequency +30, White Limit +30, Black Limit +40 (all other detail settings at default)

Aperture OFF for filmic look, Aperture -20 for video look.

I have also made some changes to the Matrix settings. I have been finding the pictures from Sony cameras to be a little on the Green/Yellow side so I have tweaked things a little to remove the yellow cast and put in a bit of red, this is a subtle change but really helps with skin tones, stopping on screen talent from looking ill! These settings work in the PMW-350, EX1/3 and PDW-700.

On an EX1/EX3 this works best with the Standard Matrix, On a PMW-350 or PDW-700 you can use it on it’s own or mix it with one of the preset matrices as a modifier. User Matrix On, R-G 0, R-B +5, G-R -6, G-B +8, B-R -15, B-G -9

Have Fun!

Uncategorized

PMW-350 or PDW-700, sample clips.

2 Comments

OK, not very scientific I know, but for those that want to see how close the pictures from theses two cameras are I have shot a quick clip with each and put them in a 54mb zip file for download. The PMW-350 clip is a 35Mb/s MP4 and the PDW-700 clip is a 50Mb/s XDCAM MXF.

The cameras were both set up with similar paint settings using Hypergamma 4. The detail is backed off a bit from the factory settings on both and I used the same lens on both cameras which was the Fujinon 16×8 lens that comes with the PMW-350. The clips have not been adjusted in any way other than trimed in length, this is how they look out of the camera.

Both are remarkably similar. I can see that the 350 is more highly saturated and that you can just about make out the difference between 4:2:0 and 4:2:2. The interesting area is how the 350 handles the overexposed sky behind the trees, or rather the way the trees don’t appear to blur into the overexposure as with the PDW-700.

Uncategorized

Brewing up a Scene File for the PMW-350 (and other cameras)

Leave a comment

I decided to write a more detailed post to continue the discussions on scene file settings for the PMW-350. This is a work in progress. Some of this may also be of interest to other camera users as I hope to give a basic description of what all the various settings do.

First off let me say that there is no “right way” or “wrong way” to set up a scene file. What works for one person may not be to anothers taste, or suit different applications. For me, my requirements are a neutral look, not over corrected or too vivid, but retaining a pleasing contrast range. I hope, as this thread develops to explain a little bit about each of the settings and what they actually do in the hope that it will make it easy for you to adjust the scene files to suit your own needs. I hope others will jump in with their suggestions too!

So first of all I have been looking at the sharpness of the image. The principle settings that affect this are the Detail and Aperture settings.

Detail enhances rapid transitions from light to dark within the pictures by exaggerating the transition with the addition of a black or white edge. So it only really works on object outlines and larger details (low frequency). The circuitry that determines where these edges are uses an electronic delay to compare adjacent pixels to see whether they are brighter or darker compared to each other. Because of this any rapid movement within the frame stops the circuitry from working. If you have picture with a lot of detail correction and you do a pan for example the image will appear to go soft as soon as the camera moves as the detail circuitry can no longer determine where the edges within the image are and thus applies less detail correction. A good way to visually gauge how much detail a camera is applying to a clip is to look for this. With a good high resolution camera, set up well, it should not be all that obvious, but a low resolution camera that uses lots of detail correction to compensate will exhibit lots of softening on pans.

As well as adjusting the amount of detail correction (Detail Level), you can also adjust the ratio of horizontal and vertical correction, the maximum brightness or darkness of the applied edges (white and black limit). The thickness of the edges (frequency), the minimum contrast change that the correction will be applied to (crispening) and you can tell the camera not to apply detail correction to dark areas (level depend).

The other setting that effects picture sharpness is Aperture. Aperture correction is a high frequency boost circuit, it simply, in effect, enhances transitions from dark to light or light to dark in fine detail and textures such as fabrics, skin, hair, grass etc. It’s operation is not as obvious as “Detail” correction, but if overdone it can make textures sparkle with flashes of white or black, all very un-natural.

An important note about image detail is that if you have too much of it for the given image resolution then you get problems such as aliasing and moire which manifest themselves as rainbows of colour or buzzing, jittering areas in the picture. If you want to know more about this look up Nyquist theory. This is one of the reasons why downconverting HD to SD and getting a good picture can be harder than you might think as you are often starting out with too much detail (but that’s another topic on it’s own).

So… on to the PMW-350. Out of the box it’s really sharp. The camera has full 1920×1080 sensors, so even with all detail correction turned off the image is still pretty sharp. However most viewers are used to seeing picture with some detail correction, so if you turn it all off, to many it looks soft. If you were going for a really filmic look, detail off and aperture off would have to be a serious option. For my customers though a little bit of subtle “zing” seems to be what they like.

I found that these settings worked well for general all-round use.

Detail Level -14?H/V Ratio +20 (helps balance horizontal and vertical resolution)?Frequency +35 (makes the edges thinner, if your doing a lot of SD you may want to go the other way to -50 so that the edges can still be seen in SD)?White Limit +35 (limits brightness of white edges)?Black Limit +30 (limits darkness of black edges)

Aperture -20

If you are doing a lot of grading and work with low key scenes (large dark areas) you can use the level depend and crispening settings to help prevent “detail” being added to any picture noise. This makes any noise less apparent.

A starting point for this would be:

Crispening +35?Level depend +20

For normal light levels these are not needed with the 350 IMHO. If you are shooting with more than +6db gain then raising the level depend to +60 will help with noise.

Uncategorized

PMW-350 Detail Settings

1 Comment


I have finally managed to get my hands on a production PMW-350. I am going to start dialing it in. The first thing to address for me is the over sharpened pictures, so I have been playing with the Paint settings aiming towards a natural, yet sharp look. I have come up with these detail setings. Everything is default except:

Detail Level -16?H/V Ratio +20?Detail Frequency +35?White limit +39?Black Limit +20?Aperture -30

This is still a work in progress.

Next I’m going to start looking at the Gamma curves and Knee. I have a nice Hamlet MicroFlex scope to help with this. Previously I have had to rely on my eye and then check the footage against the scopes in the edit suite, now I can see the waveforms on location. I’ll be writting up both the gamma settings and a microflex review in due course.

Uncategorized

PMW-350 Scene Files. Two to get you started.

2 Comments

With the PMW-350 now starting to ship I thought I would dig out the settings I used when I did my 350 review. I created two scene files and the details are as follows:

File One: Aimed at giving high latitude with deep almost crushed blacks and the image well saturated and slightly warmed up.

Detail: ON    Aperture: ON    Detail Level: -15     Aperture Level: -10     Detail Frequency: +24

Matrix: ON      Matrix (User): ON      Matrix (Preset): ON      Matrix (Prst) Sel: 6

R-G 1, R-B 12, G-R 2, G-B 11, B-R 0, B-G 0

Gamma: ON         Gamma Table: STD           Gam Table (STD): 5

Black Gamma: ON       Black Gamma Range: HIGH        Master BLK Gamma -24

Knee: ON     Knee Point: 85.2      Knee Slope: -14

White Clip: ON     White Clip Level: 109.0 (If will be graded) 104 (if not graded or for broadcast)

Master Black: -2

File Two: Aimed at giving maximum latitude with deep but not crushed blacks and vivid slightly warmed up colours.

Matrix: ON      Matrix (User): ON      Matrix (Preset): OFF      Matrix (Prst) Sel: 1

R-G 8, R-B 10, G-R 0, G-B 15, B-R 5, B-G 6

Gamma: ON         Gamma Table: HG           Gam Table (HG): 4

Black Gamma: ON       Black Gamma Range: H.MID        Master BLK Gamma -28

White Clip: ON     White Clip Level: 109.0 (If will be graded) 104 (if not graded or for broadcast)

Master Black: -3

Detail: ON    Aperture: ON    Detail Level: -15     Aperture Level: -10     Detail Frequency: +24

These settings were created on a pre-production PMW-350 so it would be wise to try them and look at them before using them in anger. All other settings are default or 0.