Tag Archives: slow

Uncategorized

NEX-FS700 Significantly reduced shutter when in Super Slow Mo!

6 Comments

UPDATED WITH NEW FRAME GRABS FROM STROBE LIGHT AT BOTTOM.

One of the things that did concern me slightly about the FS700 was how would the sensor behave in Super slow Mo. The sensor is a CMOS sensor, so I expected it to exhibit rolling shutter artefacts, which it it does indeed do when in standard shooting modes and S&Q motion. It’s not bad, but you can make the pictures skew and when you try to shooting something like a spinning propellor you can get some weird effects, especially at higher shutter speeds. However when you switch the camera to Super Slow Mo the rolling shutter effects appear to go away. I was able to shoot propellors, do fast pans, shake the camera about etc and there was little sign of the usual rolling shutter artefacts.

FS700 25P 1/100

Just take a look at these two frame grabs. One shot done at 25P with a 1/100th shutter, the other done at 100fps with a 1/100th shutter, so in both cases the shutter speed is the same, so you would expect the rolling shutter artefacts to be the same, but clearly they are not. In standard mode the fan exhibits a typically lop sided, asymmetrical look and the fan blades appear curved, the upper and lower fan blade both bent towards the right of the frame. But in Super Slow Mo mode the fan blades are straighter and the fan is a lot more symmetrical with noticeably less bias towards the right, notice in particular the differences in the lower fan blade.

FS700 Super Slow Mo 1/100th shutter

You can tell the shutter periods are the same as the amount of motion blur and spreading of the fan blades is near identical, so it’s not a shutter speed difference, this is clearly a sensor scan difference. This is very interesting and requires further investigation as it suggests that the sensor read out process is different in the high speed mode. It is probably just a significantly faster scan rate, but it could also possibly be a global shutter of some kind. It’s just a shame that you can’t access this read out mode for normal shooting.

UPDATE:

FS700 Flash band at 25fps 1/100th shutter.
FS700 Flash band at 25fps 1/100th shutter.

Here are a couple more frame grabs done with the strobe focussing flash from a Canon DSLR. In both cases the shutter speed is 1/100th of a second so you would expect the width of the “Flash Band” to be the same. The narrower the band, the slower the sensors scan speed. These frame grabs suggest the scan speed is around twice as fast when in Super Slow Mo. It’s not a global shutter, but certainly a nice improvement. This is 100% repeatable.

FS700 Flash band in Super SlowMo 100fps, 1/100th shutter

You can take advantage of this for normal speed shooting by setting the camera to SSM and  recording the SDior HDMI feed to an external recorder.

Speculation: There is a little more aliasing when shooting in SSM. Is there some line slipping going on perhaps during SSM? This would allow a faster scan speed as fewer lines of pixels are read and thus might account for both the slight aliasing increase and the faster read out speed.

Uncategorized

NEX-FS700 Slow Motion test clip.

Leave a comment

I was lucky enough to be able to borrow a pre production Sony NEX-FS700 for an evening and of course the one thing I had to check out was the super slow motion function. So my good friend Den Lennie let me shoot from his balcony overlooking the Belagio fountains in Las Vegas. The video speaks for itself really. The slow motion function is incredibly easy to use and I was surprise how well it performed shooting at night at 240 frames per second (1/240th shutter). There are lots of other nice features on the FS700 which I’ll write more about in a later post.

 

Uncategorized

How I shoot the Northern Lights

2 Comments

Well I have just returned from Iceland where I held a couple of 3D stereoscopic master classes and a workshop on video for the internet. They went well and we all had fun despite almost a foot of snow fall the morning of the classes. On the last day of my trip I decided to try and get some more Northern Lights footage. As I am often asked how I do this I put together the clip below which explains what settings I use for the Aurora and also gives a brief description of S&Q on an XDCAM EX. Basically what I do is use the EX Slow Shutter at 32 or 64 frames to increase the sensitivity of the camera. For a dim Northern Lights display I use 64 frames but for a bright display I drop down to 32 frames. The slow shutter acts like a long exposure on a stills camera. I then combine this with interval record shooting at 1 frame every second. I did also have a Canon DSLR with me and tried to shoot the Aurora with that. I found I needed a 10 second exposure at 800 asa to get a similar result to that achieved with the EX. The 10 second exposure means that it would take longer to get a decent length video sequence and most of the motion of the Aurora would be lost. Some of the exposure difference was I admit to the slower F4 lens on the Canon compared to the Sony EX’s F1.8, so perhaps with a faster lens you could bring the exposure down to around 5 seconds and this is something I hope to try when I go Aurora chasing next winter.

If you watch the video make sure you stay to the end to check out my attempt to record a piece to camera in 60 mph blowing snow! Don’t know why I even thought it would work. What I will say is that my new Vinten 5AS did a great job of keeping the camera steady in some pretty extreme conditions.