Well I have just returned from Iceland where I held a couple of 3D stereoscopic master classes and a workshop on video for the internet. They went well and we all had fun despite almost a foot of snow fall the morning of the classes. On the last day of my trip I decided to try and get some more Northern Lights footage. As I am often asked how I do this I put together the clip below which explains what settings I use for the Aurora and also gives a brief description of S&Q on an XDCAM EX. Basically what I do is use the EX Slow Shutter at 32 or 64 frames to increase the sensitivity of the camera. For a dim Northern Lights display I use 64 frames but for a bright display I drop down to 32 frames. The slow shutter acts like a long exposure on a stills camera. I then combine this with interval record shooting at 1 frame every second. I did also have a Canon DSLR with me and tried to shoot the Aurora with that. I found I needed a 10 second exposure at 800 asa to get a similar result to that achieved with the EX. The 10 second exposure means that it would take longer to get a decent length video sequence and most of the motion of the Aurora would be lost. Some of the exposure difference was I admit to the slower F4 lens on the Canon compared to the Sony EX’s F1.8, so perhaps with a faster lens you could bring the exposure down to around 5 seconds and this is something I hope to try when I go Aurora chasing next winter.

If you watch the video make sure you stay to the end to check out my attempt to record a piece to camera in 60 mph blowing snow! Don’t know why I even thought it would work. What I will say is that my new Vinten 5AS did a great job of keeping the camera steady in some pretty extreme conditions.